McHale 995 L+T Square Bale Wrapper
41
8.3 Electronic Control Box Functions
No. Function
1 Display Up
2 ESC, i.e. return to the working screen
3 Enter
4 Display Down
5 Stop
6 Display Screen
7 Table tip (In Automatic Mode, it starts the tipping part of the cycle)
8 Table lower
9 Cut & hold close
10 Cut & hold open
11 Table reverse (slow)
12
Table forward (slow/fast)
Press the button for slow speed, release & quickly press it again for fast
Resume: Restarts the wrapping or any other interruption
13 Automatic/Manual mode
14 Automatic cycle start
15 Bale lift arm down
16 Bale lift arm up
17 Not used on this machine
18 Not used on this machine