McHale 995 TSR User Manual

McHale 995 L+T Square Bale Wrapper
52
9
Wrapper Operation
9.1 Preparing the machine for wrapping
1. Load the plastic film into the dispenser running it through the rollers as shown
in Figure 9.b. Attach the film to the bale. See “Loading plastic film” on page 53.
2. Turn on the oil supply
3. Switch on the electronic control box and set to “Automatic” mode (Electronic
models).
4. Connect the bale wrap computer (Manual control models)
5. Ensure the table is in the correct starting position (see “Table load position
magnet (SR94 Program - 995 LSR & TSR)” on page 59). On electronic
machines, the control box needs to be set on “manual” to work this function.
6. The machine is now ready to wrap
Figure 9.a - 995 T Machine
WARNING: Keep out of the “Danger Zone”
Keep all persons outside of the “Danger Zone” during all machine
operations! See “Danger Zone” on page 13.
ENVIRONMENT: Recycling of the plastic film
Respect the environment! Never dump or burn waste plastic film. It’s
toxic! Always take waste materials to a recycling centre.

McHale 995 TSR Specifications

General

Brand	McHale
Model	995 TSR
Category	Stretch Wrapping Systems
Language	English