McHale 995 TSR User Manual

McHale 995 L+T Square Bale Wrapper
51
3. Press the Down Arrow six times
4. Press Enter to move to the Select Auto Load Screen
5. Press the Down Arrow (Button 4) once to select the Lower Position or twice to
select the Float Position
6. Using the Bale lift arm down (Button 15) and Bale lift arm up (Button 16), move
the arm to the desired position (Lower/Float). When it is correct, press Enter
(Button 3) to store the setting for the current position and press the Up Arrow
(Button 1) to return to the Select Auto Load Screen
7. When both settings are correct, press Enter to move to the Auto Load Screen
and change the setting to ON.
More accurate settings can be achieved if the adjustments are done as the arm is
moved from a higher to a lower position. Every time the Electronic Control Box is
switched on the operator must press Enter (Button 3) to confirm that the Auto Load
Cycle is required.
8.6.6 Technician Menu
The technician menu is reserved for McHale engineers only. A pin code needs to be
entered to access the menu.

McHale 995 TSR Specifications

General

Brand	McHale
Model	995 TSR
Category	Stretch Wrapping Systems
Language	English