McHale F5400 - Page 28

McHale F5400 Baler
28
When baling hay, straw or dry material, the handle
should be in the UP position. When baling silage,
grass or high moisture material the handle should be
DOWN.
(CST00656)
The PTO wide angle joint must never exceed
80 degrees, both when stationary or during operation
Permanent damage may result otherwise
(CST00658)
Wheel direction
(CST00711)
Diagram of net path through feeding rollers
(CST00713)
Decal indicating the settings on the variable pulley to
adjust the tension on the net
(CST00716)