McHale F5400 - Page 5

McHale F5400 Baler
5
6 Machine requirements & preparation 36
6.1 Net requirements 36
6.2 Care of the net roll 36
6.3 Care of the net wrapping system 37
6.4 Loading & operating the netter system 37
6.5 Net length adjustment setting 39
6.6 Automatic lubrication system 41
6.7 Gearbox oil 43
6.8 Tyre inflation pressures 44
6.9 Wheel chocks 45
6.10 Drawbar & PTO shaft stand usage 45
6.11 Drawbar adjustment 48
6.12 PTO shaft adjustment & maintenance 50
7 Electronic control system 52
7.1 Control box functions 53
7.2 Control box operation 53
7.3 Unblock floor operation 55
8 Road traffic safety & operation 59
8.1 Before travelling on any public roadway 59
9 Field operation & machine adjustments 61
9.1 Break-in period 61
9.2 Swath preparation 61
9.3 Pick-up reel height adjustment 62
9.4 Crop guard adjustment 63
9.5 Crop roller adjustment 63
9.6 Unblocking system 64
9.7 Net wrap system 65
9.8 Net tension adjustment 65
9.9 Net brake adjustment 67
9.10 Bale density gauge 69
9.11 Setting chamber pre-charge pressure 69
9.12 Bale size adjustment 70
9.13 Brakes (Air/Hydraulic) (if fitted) 71
9.14 Chamber door lock 73
9.15 Adjusting pick-up float springs 73
9.16 Chain adjustments 75
10 Accessories & optional equipment 78
10.1 Drawbar hitch options 78
10.2 Stand options 78
10.3 Brake options 79
10.4 Tyre options 79
10.5 Heavy duty PTO shaft 80
10.6 Crop roller 80
11 Machine maintenance 81
11.1 Maintenance intervals 81
11.2 Tightening torque values 84