McIntosh MX130

DOLBY PRO-LOGIC and THX MODES
All outputs greater than 70dB below reference level.
MAXIMUM INPUT SIGNAL
PHONO: 60mV.
HIGH LEVEL: 5V, MONO and STEREO; 2.1V, HALL, DOLBY PRO LOGIC and THX.
INPUT IMPEDANCE
PHONO: 47K ohms and 65pF capacitance
HIGH LEVEL: 22K ohms
VOLTAGE GAIN
PHONO to TAPE: 40dB
PHONO to MAIN: 54dB
HIGH LEVEL to TAPE: 0dB
HIGH LEVEL to MAIN: 14dB
TONE CONTROLS
Bass and Treble variable, 12dB boost to 12dB cut
(FM SECTION)
USEABLE SENSITIVITY
11.25dB which is 1uV across 75 ohms.
50dB QUIETING SENSITIVITY
Mono: 15dBF which is 1.6uV across 75 ohms.
Stereo: 37dBF which is 20uV across 75 ohms.
SIGNAL TO NOISE RATIO
Mono: 80dB.
Stereo: 75dB.
FREQUENCY RESPONSE
Mono: +0, -1dB, 20Hz to 15,000Hz
Stereo: +0, -1dB, 20Hz to 15,000Hz.
HARMONIC DISTORTION
Mono: 0.08% at 100Hz.
0.08% at 1000HZ.
0.12% at 10,000Hz.
Stereo: 0.08% at 100Hz.
0.08% at 1000Hz
0.12% at 10,000Hz.
INTERMODULATION DISTORTION
Mono: 0.08%
Stereo: 0.12%
CAPTURE RATIO
1.5dB.
ALTERNATE CHANNEL SELECTIVITY
70dB.
SPURIOUS RESPONSE
100dB.
SPECIFICATIONS
33