IMAGE RESPONSE
80dB.
RF INTERMODULATION
65dB.
STEREO SEPARATION
45dB at 100Hz.
50dB at 1000Hz.
35dB at 10,000Hz.
SCA REJECTION
65dB
(AM SECTION)
SENSITIVITY
20uV External Antenna Input, 50 ohm generator.
SIGNAL TO NOISE
50dB at 30% modulation.
60dB at 100% modulation.
HARMONIC DISTORTION
0.5% Maximum at 50% modulation.
FREQUENCY RESPONSE
50Hz to 6000Hz NRSC.
ADJACENT CHANNEL SELECTIVITY
45dB Minimum IMF.
IMAGE REJECTION
75dB Minimum from 540KHz to 1600KHz.
IF REJECTION
68dB Minimum.
(AC POWER AND MECHANICAL)
AC POWER OUTLETS
1 Switched for accessories.
1 Switched for Area A power amplifier.
1 Switched for Area B power amplifier.
POWER REQUIREMENTS
120 Volts, 50/60Hz, 35 watts.
SIZE
Front Panel: 17-1/2 inches (44.4cm) Wide, 7-1/8 inches (18.1cm) High. Depth behind front
panel including clearance for connectors, 17-1/2 inches (44.5cm). Knob clearance required
in front of the mounting panel is 1-1/8 inches (2.9cm).
FINISH
The front panel is all glass with gold/teal nomenclature illumination. The chassis is black.
WEIGHT
31 Pounds (14.1Kg) net, 43 pounds (19.5Kg) in shipping carton.
SPECIFICATIONS
34
To Next Page
Loading...
