5.3.2.4.1 Show Alarms
Select [Show Alarms] in [Alarm Menu] and press ENTER to go into this menu.
User can view all the fault/ alarm records in this menu.
The record shows - Alarm type
- Alarm occurred date
- Alarm occurred time
- Alarm occurred unit (Chiller ID)
Beside that, user can erase the alarm record in this menu.
Press [ESC] to exit to [Alarm Menu].
5.3.2.4.2 Erase All Alarms
Select [Erase All Alarms] in [Alarm Menu] and press ENTER to go into this menu.
User can erase all the alarm / fault records at once in this menu.
Press [ESC] to exit to [Alarm Menu].
5.3.2.5 Display Menu
Select [Display Menu] in [Main Menu] and press ENTER to go into this menu.
This menu display Defrost Sensor temperature, Compressor Discharge sensor temperature,
Compressor Run Time and Inverter Chiller. Beside that, user can clear each Compressor
Run Time for Chiller.
Press [ESC] to exit to [Main Menu]
19
[Ch 0]
Alarm 1
Comp 1 overload
01/ 01/ 00 12:00am
Are you sure ?
Press Enter to erase,
or ESC to exit.
DISPLAY MENU
Defrost Sensor
Discharge Sensor
Comp Run Time
Inverter Chiller
To Next Page
Loading...
Need help?
General
