EasyManua.ls Logo

MDC XT 14E 2021 - Page 40

MDC XT 14E 2021
101 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.marketdirect.com.au
I
Ph: 1300 494 494 I ©Copyright Page | 40
The 15-year anniversary models are supplied with an MDC engineered coupling lock device. This device is
designed and manufactured to deter the theft of your new caravan.
How to attach your lock to your Coupling:
1.
a. Cruisemaster DO-35 coupling
Make sure the dust cap is securely connected to the bump cover. This is done by locating the rear lip on the dust
cap onto the groove of the bump cover and then pushing it in a downward motion until the dust cover is secure
(there should be a slight click when it has been assembled correctly). Test if the dust cover is connected to the
bump cover by applying a slight upward force to the dust cover, it shouldn’t separate.
Slot the pin into the centre of the coupling, aligning the back tab to run in-between the gap at the rear of the
coupling.

Table of Contents

Related product manuals