MDC XT 14E 2021 - Service Schedule; Initial and 6-Month Service

www.marketdirect.com.au
I
Ph: 1300 494 494 I ©Copyright Page | 76
Service Schedule
500KM FIRST SERVICE
CHECKED
Hitch
• Check hitch bolts to 90Nm.
• Lubricate with high temp bearing grease
Handbrake
• Inspect and adjust handbrake
Brakes &
Bearings
• Inspect and adjust brakes. Check bearings are well
greased and crown nut is correctly tightened.
Wheel
nuts
• Inspect condition and torque to 125Nm (12mm studs)
(140Nm 14mm studs alloy rims) (200Nm 14mm studs
steel rims)
Tyres
•
Inspect for abnormal wear, damage, and pressure
General
fixings
• Ensure no loose fittings
Seals &
Latches
• Check all seals on doors and hatches compress 30-50%.
All seals in serviceable condition and free of damage.
Suspension
• Grease bushes and check for play.
• Check torque on suspension hanger bolts (190nm)
• Check retaining chain shackles tight.
Service Centre: Notes:
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________