Meaco Arete Two 20L - Page 13

[EN] 10
Dehumidifying your house
Your dehumidier can be used to maintain an optimum humidity level throughout your house or
at. Moisture in the air from the entire house/at will migrate towards the dehumidier, reducing the
humidity level. When doing so, we would recommend the following:
• Situate your dehumidier in a central area (e.g. a landing or hallway)
• Keep your dehumidier running 24/7
• Keep all internal doors open
• Keep external doors and windows closed
• Use Smart Humidity Mode to set your dehumidier to reach a target of 55%RH
• Open the louvre
• Insert the H13 HEPA lter to enable air purication
If you want to use your dehumidier to reduce the humidity level in a particular room or problem area,
use the same settings as above, but instead keep the doors and windows closed.
Using your dehumidier to dry your laundry
Dehumidiers are very ecient at drying your laundry quickly and cheaply. When doing so, we would
recommend the following:
• Situate your dehumidier in a room with your laundry
• Place the dehumidier close to your laundry but not too close that water could drip onto the
dehumidier
• Keep all doors and windows closed
• Use Smart Laundry Mode to set your dehumidier to run continuously for 6 hours
• Open the louvre and direct the airow towards your laundry
• Use an air circulator to circulate the dry air and reduce drying time
Display readings
When the dehumidier is turned on the chase display will show the current humidity level and the
target humidity level. The current humidity level is shown by the bars below the line. The target
humidity level is the gure circled above the line.