Meaco Arete Two 20L - Water Tank

[EN] 14
Water tank
The dehumidier can be used to collect water in one of two ways: via the water tank or via continuous
drainage. For more information on how to use continuous drainage, see page 15.
When the water tank is full and requires emptying, the dehumidier will turn o, beep ve times
(except in Night Mode) and the water tank full indicator will light up on the chase display. To empty
the water tank, simply place your hands in the recesses on both sides, hold onto the tank and pull
horizontally towards you. Use the pouring holes on the left or right corner of the tank to empty the
water (the water tank does not need to be removed).
The water collected can be used to water non-edible plants only – do not consume.
Water tank oat
Located inside the water tank is a oat. It is essential that the oat is NOT removed from the water
tank. The oat measures the level of water in the water tank and triggers the sensor to turn the
dehumidier o when the water tank is full. If the oat is removed from the water tank, the dehumidier
will not run.