93075 Page 31
4069 RT April 2014
4069 RT Machine Inspections
Pre-Start Inspection Checklist
The operator must conduct a Pre-Start Inspection of the machine before each work shift.
DO NOT use a damaged or malfunctioning machine.
Initial Description
_______ Check that the operator’s manual and manual of responsibilities are in the storage container located on the platform.
_______ Perform a visual inspection of all machine components. Look for missing parts; torn or loose hoses; hydraulic fluid
leaks; loose, torn or disconnected wires; damaged tires; etc.
_______ Check all structural components of the machine for cracked welds, corrosion and collision damage.
_______ Check all hoses and the cables for worn or chafed areas.
_______ Check the platform rails and personnel entry for damage or modification. Check for missing spring pin retainers.
_______ Check that all warning and instructional decals are present, legible and secure.
_______ Check the tires for damage.
_______ Check that all structural components, pins and fasteners are present and properly tightened.
_______ Check for fluid leaks.
_______ Check hydraulic fluid level (check with platform fully lowered).
_______ Check that battery is clean and secure. Check terminals for proper tightness. Check for corrosion.
_______ Check engine coolant level in coolant recovery bottle.
_______ Check engine oil level.
_______ Secure all covers, panels and guard rails.
_______ Ensure that the personnel entry is properly closed and secured before operating the machine.
Consult the Kubota engine manual for details regarding other engine checks and change intervals for filters and fluids.
To Next Page
Loading...
