Mec 4907 - Operating Instructions

Page 19 1330SE - Operator’s Manual
June 2023Section 7 - Operating Instructions & Functions Test
Operating Instructions
Check the area above and around the machine for obstructions and
electrical power lines before operating the machine.
Emergency Stop
Push in the red Main Power/Lower Emergency Stop Switch button to the o󰀨
position at the ground controls or the platform controls to stop all machine
functions.
Repair any function that operates when either red Emergency Stop button is
pushed in.
ART_5231
ON
OFF
Main Power/
Lower Emergency
Stop Switch
Emergency Lowering
If the control system fails while the platform is elevated, use the
emergency lowering procedure to safely lower the platform.
Do not climb down the scissor assembly or exit the platform.
The Emergency Lowering System is used to lower the platform in case of
power failure.
• Pull the Emergency Lowering Knob to lower the platform.
ART_4986
Emergency
Lowering
Knob
Outdoor/Indoor Switch
Select working environment before using machine.
• Turn the switch to OUTDOORS to restrict platform height when working
outdoors.
• Turn the switch to INDOORS to allow unrestricted platform height when
working indoors.
Art_5587