Mec 4907 - Page 24

Page 21 1330SE - Operator’s Manual
June 2023Section 7 - Operating Instructions & Functions Test
To Steer
1. Press the drive function select button.
2. Press and hold the Function Enable Switch on the control handle.
3. Turn the steer wheels with the thumb rocker switch located on the top of
the control handle.
ART_5021
Steer Switch
Function
Enable
To Drive
1. Press the drive function select button.
2. Press and hold the Function Enable Switch on the control handle.
• Increase speed: Slowly move the control handle o󰀨 center.
• Decrease speed: Slowly move the control handle toward center.
• Stop: Return the control handle to center or release the Function
Enable Switch.
Use the color-coded direction arrows on the platform controls to identify the
direction the machine will travel.
Machine travel speed is restricted when the platform is raised.
Battery condition will a󰀨ect machine performance. Machine drive speed and
function speed will drop when the battery level indicator is ashing.
ART_5022
Control Handle
Function
Enable
To Reduce Drive Speed
The drive controls can operate in two di󰀨erent drive speed modes.
• When the drive speed button light is on, slow drive speed mode is active.
• When the button light is o󰀨, fast drive speed mode is active.
Press the drive speed button to select the desired drive speed.
ART_5023
Driving On A Slope
Determine the slope and side slope ratings for the machine and determine the slope grade.
• Maximum forward/rearward slope rating, stowed position 25%.
• Maximum side slope rating, stowed position 5°.
Note: Slope rating is subject to ground conditions and adequate traction.
Press the drive speed button to the slow drive speed mode.