Page 28 92RT Scissor Lifts - Operator’s Manual
July 2020Section 10 - Machine Inspections and Maintenance
Quarterly Inspection Checklist
This checklist must be used at quarterly intervals or every 300 hours
of machine use, whichever occurs first. Failure to do so could result in
death or serious injury.
Scheduled Maintenance Inspections should be conducted by qualified service technicians only.
Photocopy this page for reuse. Keep inspections records up to date. Record and report all
discrepancies to your supervisor.
Model Number Serial Number Hour Meter Reading
Initial Description
Perform all checks listed on Prestart/Monthly Inspection.
Check the operation speeds to ensure they are within specified limits (see Specifications).
Check the emergency lowering system.
Clean and lubricate all push button switches with dry lubricant and ensure that the switches operate
freely in all positions.
Check the tightness of the platform frame and the linkage pins.
Check the overall platform and guardrail component stability.
Check the electrical mounting and hardware connections for security.
Check the king pins for excessive play.
Additional maintenance requirements for severe conditions
Initial Description
Replace hydraulic filter element (under normal conditions replace every six [6] months).
DATE INSPECTED BY
To Next Page
Loading...
