Page 32 92RT Scissor Lifts - Operator’s Manual
July 2020Section 10 - Machine Inspections and Maintenance
Routine Maintenance
IMPORTANT The operator may perform routine maintenance only. Scheduled maintenance must be
performed by qualified service technicians.
Pre-Start Inspection
Perform routine maintenance as identified in the Pre-Start Inspection Checklist on page 26.
Scheduled Maintenance
Maintenance performed monthly, quarterly, annually and bi-annually must be performed by a qualified
service technicians trained and authorized to perform maintenance on this machine, and must be
done in accordance with the procedures outlined in the service manual. Scheduled maintenance
inspection checklists are included in this manual for use by qualified service technicians.
Machines that have been out of service for more than three months must receive the quarterly
inspection before returning to service.
Maintenance Lock
Never perform service on the machine with the platform elevated without
first blocking the scissor assembly using the maintenance lock.
Set Maintenance Lock
Elevate platform approximately 16 feet (5 m) and rotate maintenance
lock to Blocked position
Lower platform until scissor assembly comes to rest on the
maintenance lock.
Scissor assembly is blocked.
1.
2.
3.
•
To Next Page
Loading...
