Page 33 92RT Scissor Lifts - Operator’s Manual
July 2020Section 10 - Machine Inspections and Maintenance
Lubrication
Operator may perform routine maintenance only. Lubrication listed as Scheduled Maintenance must
be performed by a qualified service technician.
ART_3027
Hydraulic Fluid Sight Gauge
Fuel Sight Gauge
Fuel Sight Gauge
1
2
Fuel/Fluid Module
Entry ladder not shown for clarity.
LEVEL
Add Oil Here
Fill to Here
3
No. ITEM SPECIFICATION FREQUENCY
1
Hydraulic
Reservoir
Mobile Fluid 424
Do not substitute with lower grade fluids
as pump damage may result.
Fill to the middle of the sight gauge with
platform in the stowed position.
Routine Maintenance
Check Daily
Scheduled Maintenance
Change yearly or every 1000 hours, whichever
occurs first
2
Hydraulic
Filter
Filter Element
(Located inside Hydraulic Reservoir)
Scheduled Maintenance
Normal Conditions
Change every six months or 500 hours,
whichever occurs first
Severe Conditions
Change every three months or 300 hours,
whichever occurs first
3 Hubs
SAE 90 Multipurpose Hypoid Gear Oil
API Service Classification GL5
Scheduled Maintenance
Check every three months or 250 hours,
whichever occurs first
Change yearly or every 1000 hours, whichever
occurs first
To Next Page
Loading...
