Page 29 92RT Scissor Lifts - Operator’s Manual
July 2020Section 10 - Machine Inspections and Maintenance
Annual Inspection Report
Aerial Platform Sales Corp
1401 South Madera Avenue, Kerman, California 93630, USA
Tel: 559.842.1500 Toll Free: 1.877.632.5438 Fax: 559.842.1520
Email: info@MECawp.com Web: www.MECawp.com
“Y” Yes/Acceptable
“N” No/Unacceptable
“R” Repaired
“U” Unnecessary/Not Applicable
Date Customer Dealer
Serial Number Street Street
Model Number City/State/Zip City/State/Zip
Date of Last Inspection Phone Number Phone Number
Date Placed in Service Contact Contact
Check each item listed below.
Use proper Operator’s and, Service & Parts manual for specific information
and settings.
•
•
If an item is found to be “Unacceptable” make the necessary repairs and
check the “Repaired” box.
When all items are “Acceptable”, the unit is ready for service.
•
•
Y N R U Y N R U Y N R U
Decals: Base: Operation:
Proper Placement/Quantity Cover Panels Secure Wires Tight
Legibility Base Fasteners Tight Switches Secure
Correct Capacity Noted Bolts Tight All Functions Operational
Rails: Front Axle Mounting (4WD) Emergency Down:
All Rail Fasteners Secure Rear Axle Mounting (4WD) Operational
Entry Gate/Chain Closes Properly Front Axle/Front Wheel Assemblies: Slow Speed Limit Switch:
Manual/Safety Data In Box Wheel Motors-Mounting Secure Set Properly
Rear Rail Pad In Place Wheel Motors-Leaks Pothole Bars:
Extending Platform: Lug Nuts Torqued Properly Operate Smoothly
Slides Freely Steering Cylinder Pins Secure Lock In Place
Latches In Stowed Position Pivot Points Lubed Limit Switches Adjusted
Latches In Extended Position Drive Assembly Front Hubs: Pressures & Hydraulics:
Rail Latches Work Properly Castle Nut Torqued Properly Oil Filter Secure/Chg
Cable Secure Cotter Pinned Oil Level Correct/Chg
Platform: Rear Axle/Rear Wheel Assemblies: Steering Pressure Set
Platform Bolts Tight Brakes Operational Drive Pressure Set
Platform Structure Wheel Motors-Mounting Secure Lift Pressure Set
Platform Overload System: Wheel Motors-Leaks Engine:
Functional Lug Nuts Torqued Properly Engine Mounts Tight
Calibrated Axle Pivot Lubed (4WD) Fuel Lines Secure
Wire Harnesses: Axle Lock Operational Fuel Lines Free Of Leaks
Mounted Correctly Component Area: Fuel Tanks Secure
Physical Appearance Valve Manifold(s) Secure Fuel Shut Off Valves Func.
110/220V Outlet Safe/Working Hoses Tight/No Leaks All Shields/Guards In Place
Elevating Assembly: D/C Mtr(s) Secure/Operational Oil Level
Beam Structures Contactors Secure Oil Filter
Welds Pump Secure Air Filter
Retaining Rings Batteries: Options Operational:
Upper Cylinder Pins Secure Secure Hour Meter
Lower Cylinder Pins Secure Fully Charged Battery Indicator
Lower Beam Mounts Tight Battery Charger: Warning Light
Rollers Turn Freely Secure Warning Horn
Maintenance Locks: Operational Generator
Secure Emergency Stop: Converter
Operational Breaks All Circuits
Signature/Owner-User: Date:
Signature/Mechanic: Date:
To Next Page
Loading...
