Page 45 92RT Scissor Lifts - Operator’s Manual
July 2020Section 14 - Transport and Lifting Instructions
Driving or Winching onto or off of a Transport Vehicle
MEC does not recommend unassisted loading or unloading. Always
attach the machine to a winch when loading or unloading from a truck or
trailer by driving.
Read and understand all safety, control, and operating information found
on the machine and in this manual before operating the machine.
Attach the machine to a winch.
Remove all machine tie downs. Remove wheel chocks.
Driving
Turn the Base Key Switch to PLATFORM. Check that the Emergency Stop Switch is reset by
turning it clockwise.
Enter the platform and reset the Platform Emergency Stop Switch.
Test platform control functions.
Carefully drive the machine off the transport vehicle with the winch attached.
Note The brakes are automatically released for driving and will automatically apply when the
machine stops.
Winching
Disengage brakes (see Disengage Brakes before Towing or Winching on page 44).
Carefully operate the winch to lower the machine down the ramp.
Chock the wheels and engage the brakes.
•
•
•
•
•
•
•
•
•
To Next Page
Loading...
