There are two types of sounds: Click ( Bell and click sounds)
and Vocal Counting (one, two, three, four...)
1. Press the [ click ] button to start the metronome. The beat
indicator is flashing and click sound begins to play.
2. Press the [ click ] button a second time, clicking voice will
be switched to vocal counting.
3. Press the [ click ] button again to stop the metronome.
While the metronome is playing, the display shows the
current time signature. There are five time signature types
available (2/4, 3/4, 4/4, 5/4, 6/8), which can be selected by
button [ + ] or [ -].
Adjust the volume of the click sound
Hold down the [ click ] button and press the [ + ] or [ - ]
button, the display shows: " CXX" (XX= metronome
volume, 00 to 16), press the press the [ + ] or [ - ] button
again to adjust the volume.
Play with a metronome
Beat indicator
Beat indicator
1. In the kit number page, press the [ kit ] button to enter
the global reverb mode, the LED shows the current reverb
status("roN" for reverb on of "roF" for reverb off).
2. Press the [ + ] or [ - ] buttons to turn or of off the global
reverb effect.
3. Press the [ kit ] button again to return to the kit number
page.
The unit comes with 20 (001-020) preset drum kits and 30 user
kits (021-050). (Reference kit list: page 21)
Global reverb
Select a drum kit
1. Press [ kit ] button.
The current kit number appears and the kit indicator lights.
2. Press [ + ] or [ - ] buttons to select drum kit number (001-050,
looped) you want to use.
Kit indicator
Kit
Number
Global
Reverb
Reverb On Reverb Off
10
To Next Page
Loading...
Need help?
General
