Operation
After confirming all connection have been completed, rotate the
volume knob to the left ( minimum volume level) before
switching the power on.
Set the power switch to "on" position to switch on the power.
Display shows the kit's number and its indicator lights up.
While hitting a pad, gradually rotate the volume knob until a
comfortable volume level is reached.
Switch the power ON
Set the main volume
Head shot
Hit only the head of pad.
Playing the pads
Head Head
Rim shot
When playing the snare, you must strike both the head and rim of the pad.
Head
Rim
Cymbal Bow or Edge shots
Strike the bow of the pad to produce bow sounds ; And the edge sounds will be heard if you strike
the edge of the pad.
Bow
Edge
Bow shot Edge shot
Cymbal choke
Choking the cymbal's edge with the hand immediately after hitting the cymbal makes sound stop.
9
Kit indicator
To Next Page
Loading...
Need help?
General
