Function Menu
Harmony Speed
When the harmony type is echo, tremolo or trill, the harmony speed
can set the harmony effect note speed to 4 default speed.
1. Holding down [SHIFT] button, and then press [FUNCTION+/-]
button to select harmony speed menu. LCD displays “xxx
HarmonySpeed”. Use [+/YES]/ [-/NO] or data dial to change
harmony speed. Range: 1~4.
2. Press [+/YES] and [-/NO] simultaneously will set the chorus volume
to its default setting:001.
MIDI OUT
1. Holding down [SHIFT] button, and then press [FUNCTION+/-] button
to select Midi Out menu. LCD displays “xxx Midi Out”.
Use [+/YES]/ [-/NO] or data dial to change Midi Out channel: 1~16.
2. Press [+/YES] and [-/NO] simultaneously will set Midi Out channel to
its default setting: 001.
Power Off
This function is used to set automatic shutdown time.
1. Press [FUNCTION+/-] button to select power off menu. LCD displays
“xxx PowerOff”. Use [+/YES]/ [-/NO] or data dial to change time
value: OFF, 030, 060.
2. Press [+/YES] and [-/NO] simultaneously, the time will be restored to
default: 030 (30 minutes).
MIDI IN
1. Holding down [SHIFT] button, and then press [FUNCTION+/-]
button to select MIDI in menu. LCD displays “xxx Midi In”. Use
[+/YES]/ [-/NO] or data dial to change MIDI in channel:1~16, ALL.
2. Press [+/YES] and [-/NO] simultaneously will set MIDI in channel to
its default setting: ALL.
Performance Beat Type
This function is used to set the performance assistant beat type.
1. Holding down [SHIFT] button, and then press [FUNCTION+/-] button
to select Perform Beat menu. LCD displays “xxx Perform Beat”.
Use [+/YES]/ [-/NO] or data dial to change performance beat: 4-4,
3-4, 2-4, 6-8.
2. Press [+/YES] and [-/NO] simultaneously will set performance beat
channel to its default setting: 4-4.
HarmonySpee d
Midi In
Midi Out
PowerOff
Perform Beat
27
To Next Page
Loading...
