Medeli MK401 - Playing Sounds; Selecting and Using Preset Sounds; Layer Mode for Sound Blending

1. Press the [SOUND] button to enter Sound mode. The “R1” indicator
lights up. The LCD shows the current Sound name and number.
2. Use the data dial or [<] / [>] buttons to select a Sound. Or use the
numeric buttons to enter a preset Sound number.
3. Play the keyboard to use this Sound for performance.
Layer Mode
1. Press the [LAYER] button to enter Layer mode. The “R2” indicator
lights up. The LCD shows the current layer sound name and
number.
2. Use the data dial or [<] / [>] buttons to select a layer sound. Or use
the numeric buttons to enter a preset sound number.
3. Play the keyboard. You will hear two different sounds playing
together.
4. In Layer mode, press the [LAYER] button to exit this mode.
08
Playing Sound