24
6.5. Common Interface (CI)
If you want to watch subscription channels, you must first register with the relevant
provider. You will receive a Conditional Access Module (CAM module) and a special
card from your provider after registration. You will find information about the set-
tings in the documentation supplied with the module.
Install the CI components on your television in the following way:
First insert the CAM module in the slot on the side of the LCD TV. Then insert the
card.
Connect the television to the power supply, switch it on, and wait for a moment
until the card is recognised.
Please note that you can only insert or remove the CI module when the
device is in STANDBY mode, or has been disconnected from the mains
power.
The CAM module must be inserted correctly: it cannot be inserted if it is
the wrong way round. The CAM module or the television could be dam-
aged if you attempt to insert the CAM module by force.
6.6. Connecting the mains adapter
Insert the jack plug on the supplied mains adapter into the POWER DC IN sock-
et on the device.
Connect the mains plug on the device to an easily accessible 100 - 240 V ~ 50 Hz
mains socket.
PLEASE NOTE!
Risk of damage!
Using a different mains adapter may damage the de-
vice.
Only use the supplied mains adapter.
To Next Page
Loading...
