41
EN
RADIO The number of digital radio sta-
tions found is displayed.
DATA The number of data channels
found is displayed.
DTV MANUAL TUN
ING
(only for DVB-C)
You can programme individual channels in DVB-C mode
manually here if the input signal is received via cable.
This option is only available if you have previously select-
ed DTV as the input source.
FREQUENCY Set the search frequency with
or the number buttons on
the remote control.
SR Set the symbol rate.
QAM TYPE Set the modulation.
DTV The number of digital TV chan-
nels found is displayed.
RADIO The number of digital radio sta-
tions found is displayed.
DATA The number of data channels
found is displayed.
PROGRAM EDIT You will see the currently saved channels here. You can
change the following settings for each channel.
DELETE
Select the channel that you want to delete and press the
red button [PROGRAM]. The selected channel is then
deleted.
DVB-T/C: If the SORTING BY LCN function has been acti-
vated, the channel number will also be deleted when the
channel is deleted. In order to avoid this happening, de-
activate this function under AUTO TUNING.
RENAME (only for ATV)
Select the channel that you want to rename and press
the green button [INTRO].
You can now change the first letter: scroll up and down
through the set of characters using the direction buttons
.
Move to the next and subsequent letters using the direc-
tion button .
When finished, press the green button [INTRO] again to
save the name.
To Next Page
Loading...
