43
EN
CI INFORMATION
CI+
If you want to watch subscription channels, you must
first register with the relevant provider. You will receive
a Conditional Access Module (CA module) and a special
card from your provider after registration. You will find in-
formation about the settings in the documentation sup-
plied with the module.
Install the CI components on your television in the fol-
lowing way:
Switch the television off and pull out the mains plug.
First insert the CI module in the slot on the side of the
LCD TV. Then insert the card.
Please note that you may only insert or re-
move the CI module when the device has
been disconnected from the mains electrici-
ty network.
PLEASE NOTE!
Risk of damage!
The CI module or the television
could be damaged if you attempt to
insert the CI module by force.
The CI module must be inserted
correctly: it cannot be inserted if
it is the wrong way round.
Connect the television to the power supply, switch
it on, and wait for a moment until the card is recog-
nised.
Additional setup steps may be required for some CAM
modules, which you can complete in the CI INFOR
MATION menu.
To Next Page
Loading...
