53
EN
Menu option Setting
BLUE SCREEN
If the LCD TV is not receiving a signal the screen will turn
blue rather than showing “snow” or a black background.
FIRST TIME
INSTALLATION
You can access the menu for the initial installation here.
RESET Here you can reset the device to the factory settings.
SOFTWARE
UPDATE USB
You can search for the latest software for the television
here and update it. The update takes a few minutes. Do
not interrupt the update process in order to avoid irrepa-
rable damage to the device.
HDMI CEC
(Consumer Electronics
Control)
Enable this function to enable the communication of all
devices that are connected via HDMI. In this way, you can,
for example, control all devices within an HDMI network
using only one remote control. All connected devices
must support the CEC function. Depending on device,
there may be functional limitations that cannot be chan-
ged.
CEC
CONTROL
Enable/disable the CEC function.
AUDIO RE
CEIVER
Audio Return Channel is useful if the TV is
connected to an AV receiver or a soundbar
that offers the ARC feature.
With ARC, audio signals can not only be re-
ceived via HDMI, but also sent from the
TV to an ARC-compatible device using the
same cable.
The
HDMI
port is used for ARC.
DEVICE
AUTO POW
ER OFF
Here you can select whether the connected
device is to switch to standby mode when
the TV switches to standby mode.
TV AUTO
POWER ON
Here you can select whether the TV is to
switch on when the connected device swit-
ches on.
DEVICE LIST
Devices that are connected to the HDMI
port are listed here.
DEVICE
MENU
Open the menu of connected CEC device.
SOFTWARE
VERSION
The current software version is shown.
To Next Page
Loading...
