Megger CM500 - Page 5

2. Press the SAVE key. The current printer report language is
displayed as 1 (English) or 2 (as given on the type label on
the previous page).
Note:- Language 2 can be changed using the CM500 Setup
Disk supplied.
3. Toggle the
I key until the required language setting is
displayed.
4. To save the new setting, press the
SAVE key. The bleeper
sounds and is displayed. To abort the new setting,
press the
EXIT key. is displayed.
To select the Setting
1. Toggle the I key to scroll through and display the
code.
2. Press the
SAVE key. The current setting is displayed as A
(Continental Europe) or b (U.K.).
3. Toggle the I key until the required setting is displayed.
4. To save the new setting, press the
SAVE key. The bleeper
sounds and is displayed. To abort the new setting,
press the
EXIT key. is displayed.
CM500 Setup Disk
The program on the disk enables the second printer language to
be changed into any of the separate languages. The program
may be run directly from disk. Connect the PC to the instrument
via a serial lead.
for DOS type: a:\cm500set and press: Return.
for Windows™ 3.1 or 3.11:
1. From the Program Manager options, select: File
2. From the options given, select: Run.
3. Type:
a:\cm500set and press: Return.
For Windows™ 95:
1. Select the Start menu.
2. Select the
Run option.
3. Type:
a:\cm500set and press: Return.
Follow the instructions given by the program.
5