DESCRIPTION
4
Thank you for purchasing the MFT1500 Multifunction Tester. The
MFT1500 series of tester is compact and designed to perform all of the
functions required by the electrical contractor to fully test domestic,
commercial and industrial wiring. Specially designed to comply with UK,
European and other International wiring regulations and standards, the
MFT may be used on all single and three phase systems with rated voltages
up to 300 Volts a.c. rms to earth/ground.
All test leads supplied with the MFT form part of the measuring circuit of
the instrument and must not be modified or changed in any way, or be
used with any other electrical instrument or appliance.
A plug severed from the power cord MUST be destroyed, as a plug
with bare conductors is hazardous in a live socket outlet.
OVERVIEW OF MFT SERIES
YELLOW (TEST BUTTON)
RED (TEST LOCK)
(BLUETOOTH)
BLACK (BACKLIGHT)
(1502/1552/1553 ONLY)
BLUE (RCD)
ORANGE (BUZZER THRESHOLD)
LOOP & RCD
connections
Continuity and
insulation
connections
Display
Battery cover (side panel)
RCD range
selection
Test selection
Connection
indicators
Switched probe
Mains plug test
lead
Contact Noise warning
Fuse warning
Battery status
Temperature
warning
Ohms
Null
Warning
To Next Page
Loading...
Need help?
General
