EasyManuals Logo

Megger MIT1525 User Manual

Megger MIT1525
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
26
Technical Specification
Electrical specification
Voltage input range:
5 kV, 10 kV 90-264 V rms, 50/60 Hz, 100 VA
15 kV 90-264 V rms, 47/63 Hz, 200 VA
Battery 11.1 V, 5.2 A hour, safety rated to IEC
62133:2003
Battery life
MIT515, MIT525: Typical capacity is 6 hours continuous
@ 5 kV with a 100 M load
MIT1025: Typical capacity is 4.5 hours continuous
@10 kV with a 100 M load
MIT1525: Typical capacity is 4.5 hours continuous
@ 15 kV with a 100 M load
Battery charge time: 2.5 hours from deep discharge,
2 hours from normal discharge
30 min. charge: 1 hour continuous test at 100 M, 5 kV
Test voltages
MIT515, MIT525: 250 V, 500 V, 1000 V, 2500 V, 5000 V
MIT1025: 500 V, 1000 V, 2500 V, 5000 V,10000 V
MIT1525: 1000 V, 2500 V, 5000 V, 10000V,15000 V
User defined test voltage:
MIT515, MIT525: 100 V to 1 kV in 10 V steps,
1 kV to 5 kV in 25 V steps,
MIT1025: 5 kV to 10 kV in 25 V steps
MIT1525: 5 kV to 15 kV in 25 V steps
Accuracy (23 °C) from 1 M to:
MIT515, MIT525: ±5% to 1 T, ±20% to 10 T
MIT1025: ±5% to 2 T, ±20% to 20 T
MIT1525: ±5% to 3 T, ±20% to 30 T
Guard (positioned centrally on insulator): Guards out
parallel leakage resistance down to 250
k with a maximum additional
resistance error of 1% with a 100 M
load
Display range analogue: 100 k to 10 T
Display range digital:
MIT515, MIT525: 10 k to 10 T
MIT1025: 10 k to 20 T
MIT1525: 10 k to 30 T
Short circuit current: 3 mA nominal*,
* Maximum power regulation technology ensure maximum
power transfer throughout all loads not just at short circuit
outperforming many 5 mA testers
Insulation alarm: 100 k to 1 G
Capacitor charge:
MIT515, MIT525: <3 s/µF 3 mA (5 kV)
MIT1025: <5 s/µF 3 mA (10 kV)
MIT1525: <7.5 s/µF 3 mA (15 kV)
Capacitor discharge:
MIT515, MIT525: <250 ms/µF discharge from 5000 V
MIT1025: <500 ms/µF to discharge from 10000 V
to 50 V
MIT1525: <3500 ms/µF to discharge from 15000 V
to 50 V
Capacitance range
(above 500 V): 10 nF to 25 µF (5 kV, 10 kV)
10 nF to 50 µF (15 kV)
dependant on measurement voltage,

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Megger MIT1525 and is the answer not in the manual?

Megger MIT1525 Specifications

General IconGeneral
BrandMegger
ModelMIT1525
CategoryTest Equipment
LanguageEnglish

Related product manuals