www.megger.com
13
PC Software Installation
PC Software Installation
Before installing PC software, contact your IT department. Your IT department can assist with install and provide
administrator approval if required.
Remote data viewing and download is possible from a USB connected PC with the PC software installed. To install
the PC SW:
1. Locate the TTRU1 PC software installer
a. From the TTRU1
I Connect the TTRU1 to a PC with the included USB cable
II Turn on the TTRU1
III After initialization, a CD drive will appear on the PC which contains the software
IV Locate the file named TTRU1_installer_X.xxx.exe. X.xxx is the version.
b. From the internet
I Go to www.megger.com/TTRU1
II Download the latest PC installer
2. Double click to launch the installer
3. Select a language for the install and click OK.
4. Click Next on the welcome screen
To Next Page
Loading...
