Megger TTRU1 - Initialization

www.megger.com
19
Initialization and Power Off
Initialization and Power Off
Press the power button to turn on the TTRU1. After turning on the TTRU1, the Megger logo will display, followed by
the screen corresponding to the rotary knob position.
Press the power button to put the TTRU1 into sleep mode. While in sleep mode, the power button can be pressed
again and the TTRU1 will immediately turn back on. If the power button is not pressed within 15 minutes, the
instrument will shut down.
Press and hold the power button for 3 seconds to shut down the TTRU1. While holding, a timer will appear on
screen. When the timer finishes counting down, release the power button and the TTRU1 will shut down.
In the event that the TTRU1 becomes unresponsive, press and hold the power button for 10 seconds. This will force
shut down the TTRU1 and return it to a proper operating state.