25 / 42 9742146
15.3.1 View/modify parameters
Confirm the
display by pressing "Accept".
Now the first parameter is displayed with a value.
Press the “I” button to go forwards and the “III” button to go backwards until the
parameter you require is displayed.
Press the “Accept” button to confirm the modification of the parameter; the value flashes.
Press the “I” button to increase the value, the “III” button to decrease the value, and
“accept” to save the value.
You can leave this level by pressing the “0” button.
See 15.4 for a list of parameters.
15.3.2 Ventilating the rinse aid inlet
press the “Accept” button to confirm.
This actuates the dosing pump; the remaining running time is indicated.
You can leave this level by pressing the “0” button. Ventilation is cancelled.
15.3.3 Ventilating the disinfection and cleaning agent line
press the “Accept” button to confirm.
This actuates the dosing pump; the remaining running time is indicated.
You can leave this level by pressing the “0” button. Ventilation is cancelled.
If the ventilation process is not sufficient, repeat the process.
To Next Page
Loading...
