INFO-LINE
If you have any queries about Universal 2:
•read this booklet carefully, this will help you to solve almost all problems
• consult our Internet site www.meliconi.it to answer all your queries more easily and quickly.
WARRANTY: 2 years
Tampering or improper product use will void this
guarantee.
Type of remote control Universal 2
Remote control model GumBody
Purchase date
Agent’s stamp
TROUBLESHOOTING
PROBLEM
The appliance does not respond and
the TV and VCR selection buttons do not
light up when you press a button.
The appliance does not respond but
the TV and VCR selection buttons light up.
The TV or VCR selection button is flashing.
The remote control commands are not all
working correcting.
The code for your appliance make is not in
the Code Book.
SOLUTION
Try some of the other frequently used buttons.
If the problem persists, check that the
batteries are fitted correctly.
If necessary, replace them with 2 new 1.5 V
AAA/LR03 alkaline batteries.
Check that the batteries are new and that the
remote control is pointing at the appliance
without any obstacles in the way. If required,
reset the remote control code, following the
programming procedure A or B or C
.
The batteries are low. Change them.
You may have used the wrong code. Reset the
remote control code, following the
programming procedure A or B or C
.
Set the remote control code, following the
global search programming procedure C
.