33
TV BASIC OPERATION
Adjust the volume level by pressing the VOLUME Up 1 or
Down 2 button.
M
UTE
Q.VIEW INFO
INPUT TV/DTV
SAP P.MODE
-
M
ENU
CH-
CH+
VOL
-
VOL
+
CC SLEEP
GUIDE
FAV.LIST
ARC
CH.LIST
E
0
1
2
E
NTER
3
MUTE
Q.VIEW INFO
INPUT
SAP P.MODE
-
M
ENU
CH-
CH+
VOL
-
VOL
+
CC SLEEP
GUIDE
F
AV.L IST
ARC
CH.LIST
E
0
ENTER
4
Make sure that you chose the correct reception option in the
Channel menu (see page 18).
2
Press the Power button 1 on the remote, or front of the
unit, to turn on the unit; the Power indicator will light green.
Press the INPUT button 2 repeatedly to select the TV
mode (the channel will appear in the display).
MUTE
Q.VIEW INFO
INPUT
SAP P.MODE
-
MENU
CH-
CH+
V
OL
-
V
OL
+
CC SLEEP
G
UIDE
FAV.L IST
ARC
CH.LIST
EXIT
0
1
2
ENTER
1
OPTIONS
A
IR:
If using a VHF/UHF antenna with analog or digital option.
CABLE:
If using Cable TV with analog or digital option.
NOTES:
• When AIR option is set to TV, only channels up to 69
can be chosen. When set to CATV, channels up to
125 can be chosen.
FAQs:
Why do I only receive 69 channels, when my cable goes much higher?
While in TV (NTSC) mode, the Reception option must be set to CABLE when using cable, see Step 2 above.
Why are some channels scrambled?
You must subscribe to these channels through your cable company.
For proper operation, before selecting channels, they must be set into
the unit’s program memory, see page 19.
Press and release the CHANNEL Up 1 or Down 2 button. The TV
automatically stops at the next channel set into memory.
Direct Channel Selection buttons (0-9) 3
Use these buttons to select a channel. The channel number will
appear at the top right corner of the screen. Enter the main channel
number, then the - button 5, then enter the sub-channel, followed by
the ENTER button 4.
To Next Page
Loading...
Need help?
General
