Memorex MVD1402 - DVD Basic Operation - General; Audio Mode and DVD Call Button; Mute Function

39
DVD BASIC OPERATION (GENERAL)
IMPORTANT:
When “ ” appears while pressing a button, this means that the corresponding
function cannot be performed either on the disc inserted, or in the selected
mode.
For DVD, Press the AUDIO button repeatedly to cycle
through the audio languages available on the playing DVD.
For CD/VCD, Press the AUDIO button repeatedly to cycle
through Stereo, Mono Left, Mono Right and Mix-Mono.
2
1
AUDIO MODE
You can cycle between the audio modes as follows:
Press the DVD CALL (D. CALL) button to show the elapsed
time and remaining time of the playing disc. Each time the
DVD CALL button is pressed, the time will change on the
screen as follows:
DVD: Title Elapsed, Title Remain, Chapter Elapsed,
Chapter Remain, Display Off.
VCD: repeatedly press the button for Single Elapsed,
Single Remain, Total Elapsed, Total Remain or Display Off.
2
1
DVD CALL BUTTON
MUTE
Press the Mute button ❶ to turn off the sound; the unit’s
sound will be silenced and “Mute” will appear on the
screen.
The sound can be turned back on by pressing this
button again or one of the VOLUME Up
2 or Down 3
buttons.
3
1
2
1