16
The Auto Clock function will
automatically set the built-in clock
(Month, Day, Year and Time) when
the TV/VCR/DVD is connected to an
Antenna or Cable system and it is
turned off. As the TV/VCR/DVD
searches for a receivable station in
your area and it receives a broad-
cast signal for Auto Clock, the Auto
Clock needs several minutes to set
itself.
NOTES:
•After a power failure or disconnection
of the power, the timer settings will be
lost. In this case, reset the present time.
• If you live in Newfoundland and the
Auto Clock does not function properly,
set the AUTO CLOCK menu option to
“OFF” and set the clock manually.
1 Connect the Antenna or Cable system.
• If you use a cable box, turn it on.
2 Plug the AC Power cord to the AC outlet.
3 Make sure the TV/VCR/DVD is turned off.
• If you press POWER, Auto Clock set is not effective.
4 Wait at least three minutes and press POWER.
5 Press DISPLAY/CALL to check the clock on the screen.
6 If the clock is not set, make sure you are receiving TV channels.
The Auto Clock may not function properly if the reception condi-
tion is not good.
The Auto Clock Adjustment will be performed at 12:00 PM
everyday if you turn off the TV/VCR/DVD.
• If you use a cable box and you want Auto Clock adjustment to be
performed, the cable box must be left on.
• The Auto Clock Adjustment won’t work if there is more than 5
minutes between the built-in clock time and the actual time.
1 Turn on the TV/VCR/DVD.
2 Press TV MENU.
3 Press or to select option.
4 Press or to select “AUTO
CLOCK” .
5 Press or to select “OFF”.
6 Press TV MENU repeatedly to
return to the normal screen.
• When “AUTO CLOCK” is set
to “OFF”, the Auto Clock
adjustment does not function.
• Set the clock manually (see
page 18).
AUTO CLOCK ADJUSTMENT
TO SET AUTO CLOCK TO OFF
When shipped from factory “ AUTO CLOCK” is set to “ON”.
But if you do not want Auto Clock set (Adjustment):
AUTO CLOCK SETTING
Auto clock setting