EasyManuals Logo

Memorex MVDT2402 User Manual

Memorex MVDT2402
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #47 background imageLoading...
Page #47 background image
47
Playback procedure
4
Reading
Press OPEN/CLOSE or
1 (PLAY).
The disc tray closes auto-
matically.
On the TV-screen,
changes to “Reading” and
then playback commences.
A menu screen will ap-
pear on the TV screen, if
the disc has a menu fea-
ture. In this case, press
, , , or ENTER
to operate a menu fea-
ture.
1
Press DVD to select DVD
mode. Press OPEN/
CLOSE on the TV/VCR/
DVD or the remote
control.
The disc tray will open.
2
Place a disc onto the tray.
Position it with the printed
label side up, align it with
the guides, and place it in
its proper position.
3
Press STOP to end playback.
The TV/VCR/DVD memorizes the stopped point, depend-
ing on the disc. “
” appears on the screen. Press PLAY
to resume playback (from the scene point).
If you press STOP again or unload the disc (“
” ap-
pears on the screen.), the TV/VCR/DVD will clear the
stopped point.
5
Press OPEN/CLOSE.
The disc tray opens.
Remove the disc and press POWER.
The disc tray closes automatically and TV/VCR/DVD turns
off.
NOTES:
If a non-compatible disc is loaded, “Incor-
rect Disc”, “Region Code Error” or “Paren-
tal Error” will appear on the TV screen ac-
cording to the type of loaded disc. If these
appear, check your disc again (see pages
44 and 60).
Some discs may take a minute or so to
start playback.
•A “Prohibition” symbol
may appear at
the upper left of the screen. This symbol
means either the feature you tried is not
available on the disc, or the TV/VCR/DVD
can not access the feature at this time. This
does not indicate a problem with the TV/
VCR/DVD.
When you set a single-faced disc label
downwards (ie. the wrong way up) and
press PLAY or OPEN/CLOSE on the TV/
VCR/DVD, “Reading” will appear on the
display for about 30 seconds and then “No
Disc” or “Incorrect Disc” will be displayed.
Some playback operations of DVDs may
be intentionally fixed by software produc-
ers. Since this TV/VCR/DVD plays DVDs
according to the disc contents the software
producers designed, some playback fea-
tures may not be available. Also refer to
the instructions supplied with the DVDs.
5Q00401AE(43-48) 26/5/04, 10:4747

Table of Contents

Other manuals for Memorex MVDT2402

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Memorex MVDT2402 and is the answer not in the manual?

Memorex MVDT2402 Specifications

General IconGeneral
BrandMemorex
ModelMVDT2402
CategoryTV DVD Combo
LanguageEnglish

Related product manuals