35
Cassette tape playback
Load a prerecorded tape
(When loading a cassette tape
without the erase prevention
tab, playback will start auto-
matically).
1
2
Press PLAY.
Playback will start.
"
" will appear on the screen
for about 4 seconds.
To start playback
Press STOP once.
The tape will stop but remain
fully loaded and ready to play.
"
" will appear on the screen
for about 4 seconds.
To stop playback
To rewind the tape or forward it rapidly
Stop the playback or recording with STOP.
To rewind the tape:
Press REW.
To forward the tape:
Press F.FWD.
To stop the tape-winding, press STOP. To switch to playback
directly (without STOP), press PLAY.
Forward/Reverse picture search mode
When the tape is being winded, you can switch to picture search
mode (see next page). To do this, press REW or F.FWD and hold
it down. The TV/VCR/DVD will resume the tape winding as soon
as the button is released.
• This TV/VCR/DVD selects the play-
back tape speed SP or SLP automati-
cally.
• If you play a prerecorded tape after
the DVD playback, you must set the
TV/VCR/DVD to TV/VCR mode using
TV/VCR.
•When you select the TV/VCR mode
during DVD playback, DVD playback
will change to the still mode, and after
5 minutes it will change to the stop
mode automatically.
NOTES:
Press TV/VCR to select the TV/VCR mode.
Preparation:
•
5Q00401AE(32-35) 26/5/04, 10:4635
To Next Page
Loading...
Need help?
General
