38
00 : 00 : 00 SP
CH 110
CH 110
INDEX
3
Recording a TV program
Load a cassette tape with the erase
prevention tab intact.
The TV/VCR/DVD will automatically turn
on.
Set the TV/CABLE option to the appropriate position (see
page 22).
1
2
Press SPEED to select the desired tape
speed SP or SLP.
The tape counter and SP or SLP will
appear on the screen for about 4
seconds.
4
TV - VHF/UHF channels
CABLE -
CABLE TV channels
Recording and viewing the
same TV program
Press the number buttons (0-9) or CH +/– to select the
channel to be recorded.
VHF/UHF/Cable TV CHANNELS
TV Cable TV
VHF
2-13
UHF
14-69
VHF
2-13
STD/HRC/IRC
14-36 (A) (W)
37-59 (AA) (WW)
60-85 (AAA) (ZZZ)
86-94 (86) (94)
95-99 (A-5) (A-1)
100-125 (100)(125)
01 (5A)
5
Press REC/OTR.
"
" will appear on the screen for
about 4 seconds and the Rec/Otr
indicator will light.
NOTES:
• If power is switched off during
recording, the TV and the DVD
sections go off and the VCR
continues to record.
Press STOP to halt the recording
and turn off the VCR.
• The TV/VCR/DVD channel cannot
be changed during recording.
• If you record the TV program after
the DVD playback, you must set the
TV/VCR/DVD to TV/VCR mode
using TV/VCR.
• Press TV/VCR to select the TV/VCR mode.
Preparation:
1-9 Press 0 twice and then 1-9 as required. Example: To
select 2, Press “002”.
10-12 Press 0 first and then the remaining 2 digits in order
from left to right.
Example: Press 012 for “12”.
13-99 Press 2 digits in order.
Example: Press 22 for “22”.
100-125 Press the 3 digits in order.
Example: Press 110 for “110”.
5Q00401AE(36-39) 26/5/04, 10:4738
To Next Page
Loading...
Need help?
General
