How to use MyChron 3
As you power on your MyChron 3 some information are displayed: here they are
described in the same order as they appear:
1.
AIM 1_xy
Firmware version.
2.
MYCHRON 3
Instrument name.
3.
MEMORY TOTAL FREE / TEST X LAP Y
Memory status
warning message: if the first message is displayed it means that your
MyChron 3 has no previously recorded data in its memory, otherwise it
shows the last lap number Y of the last test session X.
Configuration functions
Before getting started, please configure your gauge in order to get right
data from your system.
After having turned the power ON, please, enter into CONFIGURATION MODE
( push MENU/<< button ) for setting the parameters. Buttons MENU/<< (
back to
previous option
) and >> ( forward to next option ) are used to scroll through the
configuration menu.
To exit CONFIGURATION MODE and return to MAIN DISPLAY MODE, press
button VIEW.
23
To Next Page
Loading...
Need help?
General