Race Studio 2 program has been designed and developed to guarantee the
maximum working reliability and its proper working has been tested with
the following operative systems: Microsoft Windows 98 ™, Windows
2000 ™, Windows Me ™, Windows Xp ™. Microsoft Windows 95 ™,
Windows NT ™ and other operative systems ( Linux, Macintosh ™ ) are not
supported.
If you have troubles during installation or normal working time, please check out
our website or contact Aim.
Installing the USB drivers
Please, read carefully these instructions in order to correctly install the
USB drivers: an incorrect installation may cause serious problems on your
computer.
To connect your MyChron 3 to a PC, use the USB cable reported in the drawing
on page 12.
When the PC and the instrument are turned off, connect the cylindrical connector
of the cable to the MyChron 3 USB port and the other end to your PC’s USB
port. Now turn on both computer and MyChron 3.
During restart time, the operative system will recognize a new hardware and will
ask you to install the proper drivers, drivers that are included in Race Studio 2
installation CD-ROM.
41
To Next Page
Loading...
Need help?
General