In the two following pages it will be reported two examples concerning the USB
drivers installation for the Microsoft Windows 98 ™ and Microsoft Windows
2000 ™ operative systems.
How to install the USB Driver for Windows 98 ™:
1. Press [ Next ] button when the “Add new Hardware wizard” window
appears.
2. Select [ Search for the best driver for your device ] and press the [ Next ]
button again.
3. Place the Race Studio 2 disk in the computer’s CD-ROM drive if it is not
already there.
4. If the autorun option is enabled the system will try to install
Race Studio 2. As you have already installed it, please exit installation
menu. If the autorun option is enabled, go directly to number 5.
5. Place a check beside [ CD-ROM drive ] and click the [ Next ] button.
6. Click the [ Next ] button again.
7. Click the [ Finish ] button once reached the end of the installation.
8. Restart the computer if prompted.
42
To Next Page
Loading...
Need help?
General