Quick reference guide
Configure MyChron 3
• Press VIEW to turn the system on.
• Press MENU/<< to activate the configuration mode.
• Press MENU/<< ( previous option ) or >> ( next option ) to scroll through
the configuration menu.
Setting the number of splits
• Select the “Number of Splits” option.
• Press MEM to enter edit mode.
• Press MENU/<< or >> to set the number of splits.
• Press MEM to save or VIEW to quit.
Setting the obscuring time
• Select the “Obscuring Time” option.
• Press MEM to enter edit mode.
• Press MENU/<< to set the correct number of seconds.
• Press >> to alternate between digits.
• Press MEM to save or VIEW to quit.
Setting the maximum RPM value
• Select the “Maximum RPM Value” option.
• Press MEM to enter edit mode.
• Press MENU/<< or >> to set the required RPM.
• Press MEM to save or VIEW to quit.
52