• Temperature: it is possible to set both the Temperature measure unit
( °C or °F ) and an Alarm value;
• Lap: the user can set both the Obscuring time ( in a range between 3
and 59 seconds ) and the number of Split times.
Transmitting the configuration to MyChron 3
Once set all the parameters, it is necessary to transmit the configuration to the
instrument.
In order to transmit the configuration, you have to press Transmit pushbutton
and the system, automatically, will download the configuration from the PC to the
instrument’s memory.
It is recommended, before transmitting the configuration, to switch on the
instrument and to connect it to the PC’s USB port.
If in the instrument’s memory is stored a previous configuration, when you will
press the button Transmit it will appear the following dialog box:
50
To Next Page
Loading...
Need help?
General