How to install the USB Driver for Windows 2000 ™:
1. Press [ Next ] button when the “Found new Hardware wizard” window
appears.
2. Select [ Search for a suitable driver for my device ] and press the [ Next ]
button again.
3. Place the Race Studio 2 disk in the computer’s CD-ROM drive if it is not
already there.
4. If the autorun option is enabled the system will try to install
Race Studio 2. As you have already installed it, please exit installation
menu. If the autorun option is enabled, please go to number 5.
5. Place a check beside [ CD-ROM drive ] and click the [ Next ] button.
6. Click the [ Next ] button again.
7. Click [ Yes ] if the “Digital Signature Not Found” window appears.
8. Click [ No to All ] if the “Confirm File Replace” window appears.
9. Click the [ Finish ] button once reached the end of the installation.
10. Restart the computer if prompted.
43
To Next Page
Loading...
Need help?
General