Message
language
MyChron 3 text can be displayed in English, Italian, German,
French, Spanish or Slovenian.
To run this function, after having entered the CONFIGURATION
MODE, push MENU/<< till when you don’t see
MESSAGE LANGUAGE
Then push MEM to enter EDIT MODE and use MENU/<< or >>
to change language.
Press button MEM to save the changes or button VIEW to
discard the changes.
Firmware
version
This function shows three numbers, which represent,
respectively, the firmware version, the firmware upgrade date
and the gauge’s serial number.
To run this function, after having entered the CONFIGURATION
MODE, push MENU/<< until you see
FIRMWARE info
The firmware management window is organized on two different
rows: in the upper one it is shown the firmware version, on the
left, and the firmware upgrade date, on the right (dd/mm/yy). In
the lower row, instead, it is shown the gauge’s serial number.
Track type
selection
This feature, properly developed for kart oval racing, is
intended only for those countries (US) where such races are
available. As these championships are usually composed of
“oval track” and “standard track” races, this function allows the
user to set the track type.
29
To Next Page
Loading...
Need help?
General