Through pressing button MEM, the system will return to the
“automatic lap replay” mode.
To return to general display mode press VIEW.
View data for
oval racing
The view data function for the oval racing karts is different
from the one previously described.
Press MEM to enter the “recall data from memory” function: it
will be shown the best lap time for the last test session.
In a single page, it is displayed the test & lap number (under
the bargraph), the maximum and minimum RPM values
(under the bargraph), the RPM drop (i.e. Minimum RPM –
Maximum RPM), the lap time, the maximum and minimum
temperature values (in Fahrenheit degrees).
Moreover, the bargraph shows the RPM range (in the
previous drawing, for instance, the RPM range goes from
6108 to 7572 RPMs).
Maximum RPM
Minimum RPM
Test & lap
number
La
To Next Page
Loading...
Need help?
General