ENGLISH
110
ERROR CODES
The following error codes are shown for some faults:
Error code Explanation Possible cause
The status light
Start/Restart is
flashing rapidly
Slow water intake. The tap is not open, the water supply is limited, or the
water pressure is too low.
Overflow/leakage Leakage in some part of the dishwasher.
WARNING:
If there is an overflow, turn off the water before contacting service centre.
If there is any water in the bottom of the dishwasher because of an overflow or minor leakage,
remove the water before starting the dishwasher again.
Jula reserves the right to make changes. In the event of problems, please contact our service
department.
www.jula.com
To Previous Page
Loading...
